Home Run Inspections, LLC

Bathroom Sinks (Lavatories)

July 15, 2018/in Blog, Home Safety, Homeowner Tools /by Scott Price

Lavatories
A lavatory is a washbasin or sink located in a bathroom or washroom. “Lavatory” means washbasin or sink, and is derived from the Latin word lavatorium, which means washing vessel, and the French word laver, meaning “to wash.” Lavatories come in a variety of shapes and sizes. They are available in enameled cast-iron, vitreous china, stainless steel, porcelain-enameled formed steel, plastic, and non-vitreous ceramic. They can be wall-mounted, hanger-mounted, under-mounted, pedestal, rimmed, and above-center basin types.
Countertops integrated with lavatories are constructed of a variety of materials, including ABS, PVC, gel-coated fiberglass-reinforced plastic, acrylic, polyester, and cultured marble. Plastic vanity tops should be impregnated with fire-resistant chemicals to reduce the fuel contribution of the lavatory during a house fire or the accidental fire from a plumber’s torch. They are also made to resist the effect of a burning cigarette left unattended on the vanity top.

Lavatories should have a waste outlet of at least 1-1/4 inches in diameter. Each lavatory must have a strainer, a pop-up stopper, a crossbar, or other mechanism to prevent items such as rings, toothbrushes and cosmetic items from dropping into the drain.

Lavatory Overflows
Former standards required lavatories to have an overflow, but that is no longer the case. The overflow is now an option of the manufacturer. The reason for not requiring an overflow at a lavatory is because of the lack of use of the overflow, which can cause bacterial and micro-organism growth.

Where a lavatory does have an overflow installed, the cross-sectional area of the overflow should be a minimum of 1-1/8 inches; anything larger can promote bacterial and micro-organism growth. The overflow should be able to prevent overflowing of the sink for a minimum of five minutes when tested from the onset of water flowing into the overflow’s opening.

Maintenance Tips
There are many different designs of lavatories, including artisanal styles that sit up on the vanity, rather than being dropped into a recessed cavity in the vanity or countertop. Regardless of the style or whether it includes an overflow opening, the washbasin should be securely attached to the vanity, be free of cracks and other defects, and have gaps that are properly caulked to prevent moisture buildup, which can lead to unsanitary conditions, including mold growth.

Schedule Inspections Online at:
www.Home-RunInspections.com
Like us on Facebook: www.facebook.com/homeruninspections
Follow us on Twitter: www.Twitter.com/HomeRunInspect2

SaveSave

Toilets and Bidets

July 12, 2018/in Blog, Home Safety, Homeowner Tools /by Scott Price

A water closet in the U.S. is commonly referred to as a toilet. The term “water closet” originates from the time when plumbing was brought indoors, and defecation took place in a small, closet-size room with a pot.

Toilet Styles
There are three styles of water closets: close-coupled, one-piece, and flushometer valve. The most common is the close-coupled water closet, which has a bowl and separate gravity-type tank or flushometer tank that is supported by the bowl. A one-piece water closet is constructed with the gravity-type tank or flushometer tank and bowl as one integral unit. A flushometer-valve water closet is a bowl with a flushometer valve. Water closet bowls come in six styles: blow-out, siphon jet, reverse trap, wash-down, siphon vortex, and siphon wash.

Toilet Measurements
A water closet has a water consumption limit of a maximum average of 1.6 gallons of water per flush. The general bowl rim height above the floor is between 14 and 15 inches. Other rim heights may be needed for water closets used by children (10 inches), and the elderly and persons with physical disabilities (18 inches). Elongated water closet bowls are required for public or employee use but are often installed in homes. An elongated bowl is 2 inches longer than a regular bowl.

Defects at Toilets
The water closet (toilet) may have a clogged drain. While flushing the toilet, watch the flush performance, and use toilet paper as part of this test. There should be no excessive odors around the water closet. Check the flooring around the toilet with your foot. Using the side of your leg, check to see if the toilet is securely attached to the floor. If it wobbles, the screws at the base may be loose, or the wax ring that adheres the fixture to the waste pipe may be worn or of the wrong size. If so, it should be replaced. Look for dampness around the bottom of the toilet base. Toilets sometimes run continuously. Check for a water shut-off valve. Some toilets are mistakenly connected to the hot water system. Tank lids are often cracked. Any defective parts should be immediately replaced to avoid backup flooding.

Bidets
Common in much of Europe and Asia, bidets are toilet-like plumbing fixtures designed to promote posterior hygiene. They’re becoming increasingly common in North America. Contrary to popular belief, a bidet is not an alternative to a toilet. Its purpose is as a hygiene device following toilet use. However, some bidets have been incorporated into toilets, especially in bathrooms that are not large enough for both fixtures.

Bidets, like toilets, are typically made from porcelain and contain a deep recess within a wide rim. They emit an arc of clean water from a nozzle that may be located beneath the rear of the rim or deep within the fixture’s cavity. Users can sit on the rim (or seat, if it has one), or straddle the fixture and face in either direction. He or she can decide which direction to face based on the water jet configuration and the part of their body that needs cleaning. Water temperature and pressure can be adjusted with knobs in order to arrive at the desired settings.

Some bidets come with built-in air dryers. Toilet paper can be used for this purpose if no dryer is available. The bidet can be rinsed after use to keep it clean.

Benefits

People who suffer from hemorrhoids, irritable bowel syndrome, or have recently had surgery can find relief with the more gentle water flow of a bidet.
As the bidet requires less operator mobility, they are easier to use for the elderly, disabled and obese.
Many believe that the use of bidets is more hygienic and effective than toilet paper.

Safety Precautions

Users should familiarize themselves with the rate of temperature and pressure changes that occur when they adjust the controls. Sensitive regions can be burned if the user is not careful, and high water pressure can be irritating.
Users should know in advance the direction of the water arc and position themselves accordingly. The spray can be powerful enough to strike a person in the face.Schedule Inspections Online at:
www.Home-RunInspections.com
Like us on Facebook: www.facebook.com/homeruninspections
Follow us on Twitter: www.Twitter.com/HomeRunInspect2

SaveSave

Water Heaters

July 9, 2018/in Blog, Home Safety, Homeowner Tools, On-Going Home Maintenance /by Scott Price

A water heater is an appliance that heats potable water and supplies heated water to the home’s plumbing distribution system. Most tanks are insulated steel cylinders with an enamel coating on the inner surface. They are referred to as glass-lined tanks. The lining helps prevent corrosion. A water heater can literally explode if it’s not installed properly. There are standards that regulate the materials, design and installation of water heaters and their related safety devices. Certification marks on them from approved agencies indicate compliance with approved standards.

Conventional residential water heaters have life expectancies that vary greatly. The typical water heater has a lifespan of about 10 years, based on the following factors: correct installation; usage volume; construction quality; and maintenance.

Correct Installation
A water heater should generally be installed upright. Installing a water heater on its side will place structural stress on it due to inadequate support for the heater and its pipes, and may cause premature failure. Water heaters should be installed in well-ventilated areas — not just for fire safety requirements and nitrous-oxide buildup, but also because poor ventilation can shorten its lifespan. A water heater should also not be placed in an area susceptible to flood damage. Water can rust out the exterior and pipes, decreasing the life expectancy and efficiency of the unit. A water heater is best placed in an easily accessible area for maintenance. It should also be readily visible for fire and health-hazard requirements.

Usage
The life expectancy of the water heater depends a great deal on the volume of water used. Using large quantities of water means that the water heater will have to work harder to heat the water. In addition, the greater the volume of water, the greater the corrosive effect of the water will be on the tank materials, pipes, etc.

Construction Quality
As with most household systems and components, you get what you pay for in a water heater. Cheaper models will generally have a shorter lifespan, while more expensive models will generally last longer. A good indication of a water heater’s construction quality is its warranty. Longer warranties naturally imply sound construction. According to a 2007 Consumer Report that deconstructed 18 different models of water heaters, it was determined that models with longer warranties were of superior manufacturing quality, with nine- and 12-year models typically having larger or higher-wattage heating elements, as well as thicker insulation. Models with larger heating elements have a much better resistance to mineral buildup or scum.

Pay attention to the model’s features. For example, porcelain casing provides an additional layer of protection against rusting, and a greater level of heat insulation. Some models come with a self-cleaning feature that flushes the pipes of mineral deposit buildup, which can affect the unit’s lifespan. Models with larger or thicker anodes are better-equipped to fight corrosion.

Maintenance and Parts Replacement
The hardness of the water is another consideration when looking at estimating the lifespan of a water heater. In areas where there is a higher mineral content to the water, water heaters have shorter a lifespan than in other areas, as mineral buildup reduces the units’ efficiency. Even in areas where the water is softer, however, some mineral deposition is bound to occur. A way to counteract this mineral buildup is to periodically flush the water heater system, which not only removes some of the buildup, but, in tank systems, the process heats the water in the tank. Higher-end models typically come equipped with a self-flushing feature. In models for which manual flushing is required, it is important not to damage the water heater valve, which is usually made of plastic and is easy to break.

Although an older model may appear to be well-maintained, a question arises: Is the maintenance worth it? Warranties often exclude labor costs, so a good rule to follow is that if the total repair cost per year is greater than 10% of the cost of buying and installing a new water heater, it is probably not worth replacing any damaged parts.

Schedule Inspections Online at:
www.Home-RunInspections.com
Like us on Facebook: www.facebook.com/homeruninspections
Follow us on Twitter: www.Twitter.com/HomeRunInspect2

15 Tools Every Homeowner Should Own (Part 3)

January 28, 2016/0 Comments/in Blog, Home Safety, Homeowner Tools /by Scott Price

The following items are more essential tools, but this list is by no means exhaustive. Feel free to ask me at your next home inspection(or contact me at any of the links below) about other household tools you might find useful.

Please refer to my previous post to complete your stash of must-have home maintenance tools!

Claw Hammer: A good hammer is one of the most important tools you can own. Use it to drive and remove nails, to pry wood loose from the house, and in combination with other tools. They come in a variety of sizes, although a 16-ounce hammer is the best all-purpose choice.
Screwdriver Set: It’s best to have four screwdrivers: a small and large version of both a flathead and a Phillips-head screwdriver. Electrical screwdrivers are sometimes convenient, but they’re no substitute. Manual screwdrivers can reach into more places and they’re less likely to damage the screw.
Wire Cutters: Wire cutters are pliers designed to cut wires and small nails. The side-cutting style (unlike the stronger end-cutting style) is handy, but not strong enough to cut small nails.
Respirator / Safety Mask: While paints and other coatings are now manufactured to be less toxic (and lead-free) than in previous decades, most still contain dangerous chemicals, which is why you should wear a mask to avoid accidentally inhaling their fumes. A mask should also be worn when working in dusty and dirty environments like attics or crawlspaces. Disposable masks usually come in packs of 10 and should be thrown away after use(I recently discovered a disposable with an exhale port to keep from fogging up your glasses). Full and half-face respirators can be used to prevent the inhalation of very fine particles that ordinary face masks will not stop, such as insulation fibers and sawdust.
Duct Tape: Any engineer from #NASA to #NASCAR will tell you how important it is to keep a roll of this around. This tape is extremely strong and adaptable. Originally, it was widely used to make temporary repairs to many types of military equipment. Today, it’s one of the key items specified for home emergency kits because it’s water-resistant and extremely sticky. Duct tape now comes in a variety of colors(#hobby lobby has some great designs), but remember that it’s meant to be used as a temporary fix.

To save money, check out one of your local discount tool warehouses.

Remember! Always think safety. It’s often worth the money to pay a professional to avoid to personal risk.

Scott Price, CPI, #1532
Certified Home Inspector
Home Run Inspections
405-905-9175
Info@HomeRunInspections.com
We cover all of the bases!

Serving the Oklahoma City metro and surrounding areas including Edmond, Guthrie, Cashion, Yukon, Moore, Norman, Chickasha, Midwest City/Del City, Bethany, El Reno, Shawnee, Harrah, and more.

Schedule Inspections Online at:
www.Home-RunInspections.com
Like us on Facebook: www.facebook.com/homeruninspections
Follow us on Twitter: www.Twitter.com/HomeRunInspect2

http://www.home-runinspections.com/

15 Tools Every Homeowner Should Have (Part 2)

December 19, 2015/0 Comments/in Blog, Homeowner Tools, On-Going Home Maintenance /by sherineprice

flashlight

Your Homeowner’s Newsletter from Home Run Inspections

Here’s the second edition of my homeowner’s newsletter! Each month, you’ll find plenty of useful information for keeping your house in great condition so that you can enjoy it for years to come. Preserve your investment—and keep your family safe and healthy—by maintaining your home using the following tips.

15 Tools Every Homeowner Should Have (Part 2)

Flashlight: None of the tools you own will be of any use if you cannot visually inspect the situation. The problem—and solution—are apparent only with a good flashlight. A traditional two-battery flashlight is usually sufficient, as larger flashlights may be too unwieldy. Of course, having backups at home (as well as in all your vehicles) is a must for emergency situations.
Tape Measure: Measuring house projects requires a tape measure—not a ruler or a yardstick. Tape measures come in many lengths, although one that is at least 25 feet is best. Measure everything at least twice to ensure accuracy, regardless of the project.
Hacksaw: A hacksaw is useful for cutting metal objects, such as pipes, bolts and brackets. Hacksaws look thin and flimsy, but they’ll easily cut through even the hardest of metals. Blades are replaceable, so focus your purchase on a quality hacksaw frame. Use a stable surface for cutting, and use caution, as a hacksaw injury can be painful and deep.
Torpedo Level: Only a level can be used to determine if something, such as a shelf, appliance or picture, is correctly oriented. The torpedo-style level is unique because it not only shows when an object is perfectly horizontal and vertical, but it also has a gauge that shows when an object is at a 45-degree angle. The bubble in the viewfinder must be exactly in the middle—not merely close.
Safety Glasses / Goggles: For all tasks involving a hammer, saw or a power tool, you should always wear safety glasses or goggles. They should also be worn while you mix chemicals, install insulation, and do major renovation projects involving tear-downs of building materials, such as drywall, because anything that can go airborne upon destruction can wind up in your eyes, causing irritation or injury.
The last five tools will be covered next month!

Scott Price, CPI, #1532
Certified Home Inspector
Home Run Inspections
405-905-9175
Info@HomeRunInspections.com
We cover all of the bases!

Serving the Oklahoma City metro and surrounding areas including Edmond, Yukon, Moore, Norman, Midwest City/Del City, Bethany, El Reno, Shawnee, Harrah, and more.

Schedule Inspections Online at:
www.Home-RunInspections.com
Like us on Facebook: www.facebook.com/homeruninspections
Follow us on Twitter: www.Twitter.com/HomeRunInspect2

15 Tools Every Homeowner Should Have (Part 1)

December 11, 2015/0 Comments/in Blog, Homeowner Tools /by sherineprice

Plunger: A clogged sink or toilet is one of the most inconvenient household problems. With a plunger on hand, you can usually get the water flowing again fast. It’s best to have two plungers: one for the sink and one for the toilet.

Combination Wrench Set: One end of a combination wrench is open and the other end is a closed loop. Nuts and bolts are manufactured in standard and metric sizes, so it’s handy to have set of different sizes in both types. For the most leverage, always pull the wrench toward you. Also, avoid over-tightening.

Slip-Joint Pliers: Use these to grab hold of a nail, nut, bolt, and much more. These pliers are versatile because of their jaws, which feature both flat and curved areas for gripping many things. They also have a built-in slip-joint, which allows you to quickly adjust the jaw size to suit most tasks.

Adjustable Wrench: It can be somewhat awkward to use at first, but an adjustable wrench is ideal when you need wrenches of different sizes. Screw the jaws all the way closed to avoid damaging a bolt or nut.

Caulking Gun: Caulking is a quick way to seal up gaps in tile, cracks in concrete, and leaks in certain types of piping. Caulking can provide thermal insulation and control water penetration. Caulk should be applied only to areas that are clean and dry.

Scott Price, CPI, #1532
Certified Home Inspector
Home Run Inspections
(405) 905-9175
Info@HomeRunInspections.com

We Cover All of the Bases!

Serving the Oklahoma City metro and surrounding areas including Edmond, Yukon, Moore, Norman, Midwest City, Bethany, El Reno, Shawnee, Harrah, and more.

Schedule Inspections Online at:
www.Home-RunInspections.com
Like us on Facebook: www.facebook.com/homeruninspections
Follow us on Twitter: www.Twitter.com/HomeRunInspect2

Bathroom Sinks (Lavatories)

Toilets and Bidets

Water Heaters

15 Tools Every Homeowner Should Own (Part 3)

15 Tools Every Homeowner Should Have (Part 1)

Home Run Inspections, LLC

Oklahoma Service Areas

Florida Service Areas

Certified Master Inspector